 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MA4P HIPAXTM High Power PIN Diodes V9 Features High Power Handling Low Loss / Low Distortion Voltage Ratings up to 1000 Volts Passivated Chip for Low Leakage Current Low Theta () Due to Full Face Chip Bonding Leadless Low Inductance MELF Packages Various Package Options Available as Chips Fully RoHS Compliant Package Styles 401 & 402 1072 & 1091 Description M/A-COM Technology Solutions MELF and HIPAX PIN diode series are designed for usage in switch and attenuator applications requiring high power handling and low distortion. The MELF and HIPAX PIN diodes incorporate a fully passivated PIN diode chip resulting in an extremely low reverse bias leakage current. The semiconductor technology utilized in the MELF and HIPAX families draws on M/A-COM's substantial experience in PIN diode design and wafer fabrication. The result is a device which has a thick I-region and long carrier lifetime while maintaining low series resistance and capacitance values. The chips of the MELF and HIPAX PIN diodes are enclosed in a rugged ceramic package and is full face bonded to metal pins on both the anode and cathode. The result is a low loss PIN diode with low thermal resistance due to symmetrical thermal paths. The parts are offered in either a HIPAX , axial leaded or Metal Electrode Leadless Faced (MELF) surface mount packages that have a rectangular outline. These rectangular SMQ, PIN diodes are designed for high volume tape and reel assembly. This easy to use package design makes automatic pick and place, indexing and assembly, extremely easy. The parallel flat surfaces are suitable for most key jaw or vacuum pick-up techniques. All solderable surfaces are tin plated and compatible with industry standard reflow and vapor phase soldering processes. Applications HIPAX PIN diodes are designed for use in a wide variety of switch and attenuator applications from HF through UHF frequencies and at power levels above 1kW, CW. The internal chip as well as each diode assembly has been comprehensively tested and characterized to ensure predictable and repeatable performance. Design Recommendations Low Distortion Attenuators *MA4P4301B Surface Mount Switches *MA4P7101F Cellular Radio Antenna Switches * MA4P1200, MA4P1250 Absolute Maximum Ratings TAMB = +25C (Unless Otherwise Noted) 1,2 Parameter Absolute Maximum D.C. Reverse Voltage Operating Chip Junction Temperature Storage Temperature Installation Temperature (See Tables) -55C to +175C -55C to +200C +280C for 30 Seconds Notes 1. Operation of this device above any one of these parameters may cause permanent damage. 2. Please refer to application note M538 for surface mounting instructions. 1 * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P HIPAXTM High Power PIN Diodes V9 MA4P1000 Series Electrical Specifications @ TAMB = +25C VR Reverse Voltage VDC Part Number Condition IR = 10 A MINIMUM MA4P1200 - 401T MA4P1250 -1072T MA4P1450 -1091T 50 50 50 CT Total Capacitance pF Conditions f = 1 MHz VR = 50 V RS Series Resistance Conditions f = 100 MHz IF = 50 mA RP Parallel Resistance k Conditions f = 100 MHz VR = 0 V MINIMUM 5 5 5 MAXIMUM TYPICAL MAXIMUM TYPICAL MAXIMUM RATING 100 100 100 1.2 0.8 1.8 1.5 1.2 2.5 0.5 0.5 0.5 0.75 0.75 0.75 VF Forward Voltage Part Number Condition IF = 50 mA TYPICAL MA4P1200 - 401T1 MA4P1250 -1072T MA4P1450 -1091T * 1 1 TL Carrier Lifetime Conditions IF = 10 mA IR = 6 mA Forward Bias Reverse Bias Harmonic Distortion Harmonic Distortion R(2a/a) * R(3a/a) R(2a/a) - R(3a/a) Conditions f = 100 MHz PIN = 30 W Conditions f = 100 MHz PIN = 0 dBm MAXIMUM 2 MINIMUM TYPICAL MINIMUM TYPICAL MINIMUM TYPICAL RATING 1.0 1.0 1.0 2 2 2 8 8 8 80 80 80 90 90 90 60 60 60 70 70 70 0.85 0.85 0.85 Notes: 1.) Also available in a non-magnetic package for MRI applications. Same electrical specifications as above. Non-magnetic version of the MA4P1200 - 401T = MA4P1200NM - 401T Non-magnetic version of the MA4P1250 - 1072T = MA4P1250NM -1072T 2.) Maximum forward current for all devices @ 1V is 1.5A Power Dissipation and Thermal Resistance Ratings @ TAMB = +25C Package Style B Axial Lead F MELF CONDITION No Heatsink Lead Length 1/4" No Heatsink Infinite Heatsink MA4P1200-401T PDISS 1.5 W 5.5W JC 15C/W MA4P1250-1072T PDISS -- -- 6W 18W JC -- -- 15C/W MA4P1450-1091T PDISS -- -- 10W 30W JC -- -- 5C/W Specifications subject to change without notice 2 * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P HIPAXTM High Power PIN Diodes V9 Typical Performance Curves @ TAMB = +25C MA4P1200 Series Series Resistance @ 100 MHz vs. Forward Current Capacitance vs. Frequency & Reverse Bias Series Resistance Capacitance pF MHz Frequency Forward Current Parallel Resistance vs. Frequency & Reverse Bias Heatsink Temperature vs. Max. Power Dissipation Maximum Power Dissipation Parallel Resistance MHz Frequency Watts C Heatsink Temperature 3 * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P HIPAXTM High Power PIN Diodes V9 Typical Performance Curves @ TAMB = +25C MA4P1250 Series Series Resistance @ 100 MHz vs. Forward Current Capacitance vs. Frequency & Reverse Bias Series Resistance Capacitance pF Forward Current MHz Frequency Parallel Resistance vs. Frequency & Reverse Bias Carrier Lifetime vs. Forward Bias Current Parallel Resistance MHz Frequency Carrier Lifetime Forward Current 4 * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P HIPAXTM High Power PIN Diodes V9 Typical Performance Curves @ TAMB = +25C MA4P1450 Series Series Resistance @ 100 MHz vs. Forward Current Capacitance vs. Frequency and Reverse Bias Series Resistance Capacitance pF MHz Forward Current Frequency Parallel Resistance vs. Frequency and Reverse Bias Parallel Resistance MHz Frequency 5 * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P HIPAXTM High Power PIN Diodes V9 MA4P4000 - MA4P7000 Series Electrical Specifications @ TAMB = +25C Parameter Maximum Series Resistance Maximum Total Capacitance Minimum Parallel Resistance Minimum Carrier Lifetime Maximum Forward Voltage Maximum Reverse Current Nominal I-Region Width Symbol RS CT RP TL VF IR Condition IF = 100 mA f = 100 MHz VR = 100 V f = 1 MHz VR = 100 V f = 100 MHz IF = 10 mA IR = 6 mA IF = 100 mA At Maximum Rated Reverse Voltage -- MA4P4000 Series 0.5 2.2 pF 20 k 6 s 1.0 V 1 A 175 m MA4P4300 Series 1.0 2.0 pF 50 k 8 s 1.2 V 1 A 300 m MA4P7000 Series 0.9 0.7 pF 200 k 3 s 1.0 V 1 A 175 m MA4P7100 Series 0.5 1.0 pF 100 k 2.5 s 1.0 V 1 A 100 m Maximum Rated Reverse Voltage ( VR ) vs. Model Numbers Maximum Rated Reverse 100 Volts 200 Volts 400 Volts 600 Volts MA4P4000 Series MA4P4001B-402 MA4P4001F-1091T MA4P4002B-402 MA4P4002F-1091T -- MA4P4006B-402 MA4P4006F-1091T MA4P4300 Series MA4P4301B-402 MA4P4301F-1091T -- -- -- MA4P7000 Series MA4P7001F-1072T MA4P7002B-401T MA4P7002F-1072T -- MA4P7006B-401T MA4P7006F-1072T MA4P7100 Series MA4P7101B-401/401T MA4P7101F-1072T MA4P7102B-401/401T MA4P7102F-1072T MA4P7104B-401/401T MA4P7104F-1072T -- Power Dissipation and Thermal Resistance Ratings @ TAMB = +25C Package Style Condition 1/4" Lead Length No Heatsink Infinite Heatsink Single 1 s pulse Single 100 s pulse MA4P4000 Series PDISS B Axial Leaded F MELF Both B and F Both B and F 12 W 2.5 W 7.5 W 100 kW 5 kW JC 12.5C/W -- 20C/W -- 0.03C/W MA4P4300 Series PDISS 10 W 2.5 W 5W 100 kW 5 kW JC 15C/W -- 30C/W -- MA4P7000 Series PDISS 5W 1.5 W 3W 15 kW JC 30C/W -- 50C/W -- MA4P7100 Series PDISS 6W 1.5 W 3W 15 kW JC 25C/W -- 50C/W -- 0.03C/W 300 W 0.5C/W 300 W 0.5C/W *Specifications subject to change without notice 6 * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P HIPAXTM High Power PIN Diodes V9 Typical Performance Curves @ TAMB = +25C MA4P4000,MA4P4300, MA4P7000, MA4P7100 Series Series Resistance at 100 MHz vs. Forward Current MA4P4000, MA4P4300 Series Series Resistance at 100 MHz vs. Forward Current MA4P7000, MA4P7100 Series Series Resistance Series Resistance Forward Current Forward Current Thermal Resistance vs. Pulse Width MA4P4000, MA4P4300, MA4P7000 & MA4P7100 Series Carrier Lifetime vs. Forward Bias Current MA4P4000, MA4P4300, MA4P7000 & MA4P7100 Series Thermal Resistance Carrier Lifetime S C/W Forward Current Pulse Width 7 * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P HIPAXTM High Power PIN Diodes V9 Typical Performance Curves @ TAMB = +25C MA4P4000, MA4P4300, MA4P7000, MA4P7100 Series Capacitance vs. Frequency & Reverse Bias MA4P4000 Series Capacitance vs. Frequency & Reverse Bias MA4P4300 Series Capacitance pF Capacitance pF MHz Frequency MHz Frequency Capacitance vs. Frequency & Reverse Bias MA4P7100 Series Capacitance vs. Frequency & Reverse Bias MA4P7000 Series Capacitance Capacitance pF pF MHz Frequency MHz Frequency 8 * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P HIPAXTM High Power PIN Diodes V9 Typical Performance Curves @ TAMB = +25C MA4P4000, MA4P4300, MA4P7000, MA4P7100 Series Parallel Resistance vs. Reverse Bias & Frequency MA4P4000 Series Parallel Resistance vs. Reverse Bias & Frequency MA4P4300 Series Parallel Resistance Parallel Resistance Volts Reverse Bias Parallel Resistance vs. Reverse Bias & Frequency MA4P7000 Series Volts Reverse Bias Parallel Resistance vs. Reverse Bias & Frequency MA4P7100 Series Parallel Resistance Parallel Resistance Volts Reverse Bias Volts Reverse Bias 9 * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P HIPAXTM High Power PIN Diodes V9 Case Styles 401 Axial Leaded Packages Cathode Band B 402 Axial Leaded Packages Cathode Band B D D C A C C A C Dimension Dimension Parts Available in 401 Package (tape and reel) INCHES MIN. -- -- 0.975 0.027 0.029 MAX 0.130 0.090 MIN. -- -- MM MAX. 3.30 2.29 -- 0.74 Parts Available in 402 Package (bulk only) INCHES MIN. -- -- 0.975 0.039 0.041 MAX 0.230 0.140 MM MIN. -- -- 24.64 0.76 MAX. 5.84 3.56 -- 1.02 A MA4P7002B-401T MA4P7006B-401T B MA4P7101B-401T MA4P7102B-401T C MA4P7104B-401T D A MA4P4001B-402 MA4P4002B-402 MA4P4006B-402 MA4P4301B-402 B C D 24.77 0.69 1091 MELF Surface Mount Packages Cathode A 1072 MELF Surface Mount Packages Cathode A B Solderable Surfaces B Solderable Surfaces A A C C Parts Available in 1091 Package (tape and reel only) MA4P4001F-1091T A MA4P4002F-1091T MA4P4006F-1091T B MA4P4301F-1091T C *Specifications subject to change without notice product M/A-COM Solutions 10 ADVANCED: Data Sheets contain information regarding atarget specifications,Technologyresults, is considering for development. Performance is based on simulated and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Dimension Dimension INCHES MIN. 0.138 0.180 0.008 MM MAX. MIN. MAX. 0.155 0.200 3.51 4.57 3.94 5.08 Parts Available In 1072 Package (tape and reel only) INCHES MIN. MAX. MM MIN. MAX. 0.030 0.203 0.762 MA4P7001F-1072T A 0.080 0.095 2.032 2.413 MA4P7002F-1072T MA4P7006F-1072T B 0.115 0.135 2.921 3.429 MA4P7101F-1072T MA4P7104F-1072T C 0.008 0.030 0.203 0.762 * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MA4P HIPAXTM High Power PIN Diodes V9 MELF Assembly Recommendations Devices may be soldered using standard 60Sn/40Pb or RoHS compliant solders. Axial leads and solderable surfaces of MELF devices are tin plated 50 M thick to ensure an optimum connection. For recommended Sn/Pb and RoHS soldering profiles See Application Note M538 on the M/A-COM website. Circuit Pad Layout for MELF Diodes Dimension Package Style 1072 inches A B C 0.093 0.050 0.060 mm 2.36 1.27 1.52 Package Style 1091 inches 0.150 0.050 0.100 mm 3.81 1.27 2.54 MELF Internal Construction A B C B Ordering Information MELF diodes are available in tape and reel in quantities as shown in table below Package Style 1072T 1091T Quantity 7" Reel 1500 500 Bulk Devices Per Bag N/A N/A Tape and reel information can be found on the M/A-COM website at http://www.macomtech.com/Application Notes/pdf/M513.pdf *Specifications subject to change without notice product M/A-COM Solutions 11 ADVANCED: Data Sheets contain information regarding atarget specifications,Technologyresults, is considering for development. Performance is based on simulated and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. MA4P HIPAXTM High Power PIN Diodes V9 Axial Leaded HIPAX Assembly Recommendations Bends on case styles 401 and 402, axially leaded devices, must be made while holding the lead firm and forming the bend no closer than .060 inches from the body of the part. Bending the lead < 0.060 inches from the body of the part is not recommended and may cause internal damage to the chip. Appropriate fixturing should be used. Devices may be soldered using standard 60Sn/40Pb or any RoHS compliant solders. Axial leads are tin plated 50m thick to ensure an optimum connection. For recommended Sn/Pb and RoHS soldering profiles See Application Note M538 on the M/A-COM website. Case Style 401 & 402 Minimum Bend Distance Case Style 401 & 402 Internal Construction Cathode Band Passivated Chip .060" Min .060" Min Ordering Information Axial leaded diodes are available in tape and reel or bulk in quantities as shown in table below Package Style 401T 402 Quantity Per Reel 500 N/A Bulk Devices Per Bag N/A 100 Environmental Ratings HIPAX PIN diodes are designed to meet most environmental and electrical requirements and may be ordered screened to MIL-STD-750 specifications as described in the table below. TEST Moisture Resistance High Temperature Storage HTRB Temperature Shock Fine Leak Constant Acceleration Solderability Tension1 Lead Fatigue1 METHOD 1021 1031 1038 1051 1071 Cond. H 2006 2026 2036.3 Cond. A 2036.3 Cond. E DESCRIPTION/ CONDITIONS 85C, 85% Relative Humidity, 168 hrs +175C , 250 Hours 80% of rated VR, 50C, 96 Hours -65C to +175C, 20 Cycles 1 X 10-7 CC/Sec 20,000 G's IPC/JDEC J-STD-02 2 Lbs., 30 Seconds 3 Cycles, 8 oz., 90, Note: 1.Test applicable to HIPAX axially leaded devices only. product M/A-COM Solutions 12 ADVANCED: Data Sheets contain information regarding atarget specifications,Technologyresults, is considering for development. Performance is based on simulated and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. |
Price & Availability of MA4P1450-1091T
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |